FIRE SUPPRESSION

Thermocord PIC

The DSPA Thermocord PIC can be used as part of a highly effective fixed extinguishing system. A thermocord PIC is installed to a DSPA Generator and can be used for the detection of fire and the activation of the DSPA generator. The DSPA Thermocord PIC in combination with a DSPA generator are effective on class A, B, C fires.

  • The DSPA Thermocord PIC is recommended for the protection of objects and narrow compartments under moisture conditions, such as engine compartments, electrical cabinets, switchgears and cable ducts.

    • Exceptional effective fire detection cable

    • 100% Waterresistant (except ends)

    • Uniquely easy to install and maintain

    • Compatible with all DSPA Generator types

  • Model: Thermocord

    Part number: 1000029 (t)

    Length: 80 × 16 mm

    Total weight: 70 g

    Volume coverage: 0,15 m³

    Burning time: 5-7 seconds

    Activation, current: Built-in starter, 1.3A (e) or built-in thermocord (t)

    Operation conditions: -40°C to 75°C/ -40°F to 167°F Up to 95% RH

    Colour: Standard RAL 3000, other colours upon request

    Storage: The storage needs to be approved according national legislation. The thermocord PIC must only be stored in its original packing in a dry and cool environment.

    Notes for secure handling: The product can be activated by open fire, a spark, or by temperature. Protect from heat sources and direct sunlight. Open the packaging with care. Don’t use any machinery nearby that may create sparks. Keep away from heat sources — don’t smoke.

FOR MORE INFORMATION

We can help you choose the right products to keep your business and home fire safe