FIRE SUPPRESSION
DSPA 11-1, 11-2, 11-3
DSPA aerosol generators 11-1, 11-2 and 11-3 can be used as a part of a highly effective fire extinguishing system. A DSPA generator is non-pressurised and is installed inside a room or compartment that requires protection. After activation, an aerosol cloud is generated, which expanse volumetrically, flooding the space and extinguishing the fire.
-
The DSPA generators 11-1, 11-2 and 11-3 are recommended for the protection of narrow compartments or objects, such as suspended ceilings, raised floors, cable ducts, transport vehicles, switchgears etc. They are mainly designed to use in normally unoccupied and unoccupied areas and are effective on class A, B, C and F fires.
Exceptional effective non-toxic fire extinguishing agent
Uniquely easy to install and Maintain
Tested as per EN 15276-1, NEN-ISO 15779, UL 2775 and BRL K23001
Approved by EPA for SNAP listing
Ecologically safe and environmentally friendly (O.D.P.=0, G.W.P.=0)
Very cost efficient
-
Model: 11-1
Part number: 100011
Dimensions: 122 × 22 mm
Total weight: 550 g
Compound weight: 110 g
Volume coverage: 1,07 m³
Discharge time: 6-10 sec
Activation, current: Built-in starter, 1.3A
Operation conditions: -40°C to 75°C/ Up to 95% RH
Colour: Standard RAL 3000, other colours upon request
-
Model: 11-2
Part number: 100012
Dimensions: 124 × 34 mm
Total weight: 800 g
Compound weight: 170 g
Volume coverage: 1,66 m³
Discharge time: 9-15 sec
Activation, current: Built-in starter, 1.3A
Operation conditions: -40°C to 75°C/ Up to 95% RH
Colour: Standard RAL 3000, other colours upon request
-
Model: 11-3
Part number: 100013
Dimensions: 133 × 54 mm
Total weight: 1300 g
Compound weight: 300 g
Volume coverage: 2,92 m³
Discharge time: 14-16 sec
Activation, current: Built-in starter, 1.3A
Operation conditions: -40°C to 75°C/ Up to 95% RH
Colour: Standard RAL 3000, other colours upon request
FOR MORE INFORMATION
We can help you choose the right products to keep your business and home fire safe